Usage Guide

First Time Setup Instructions

1. Plug in tablet with a USB-C cable (not included). The LED should light up in a bright rainbow.
2. Deactivate tablet by holding down the keyswitchs for 1 second. The LED should turn blue.
3. Open the HYKU Configurator and open the Tools tab. Ensure tablet is recognized by the program with the “Connected” indicator at the bottom left.
4. Click Fetch Releases button, select latest version, and press Update.
5. After Update completes, the tablet will need to be re-calibrated.
6. To Calibrate, position arm in a straight line as shown in image and press calibrate.
7. Reactivate tablet by holding down the keyswitchs for 1 second. The LED should turn bright rainbow.

Configurator Usage Instructions

1. Configure tablet screen area and tablet area by entering values in the Area Settings tab.
2. Ensure Tablet is plugged in and recognized by the program with the “Connected” indicator at the bottom left.
3. Press the Upload button to apply settings and upload them to the tablet.

What is it?

The HYKU Tablet is a novel drawing tablet-style input device designed from the ground up for osu!.

Why HYKU?

The goal of the HYKU is to create a pen tablet that is optimized for low latency. Most drawing tablets currently available offer polling rates below 200 Hz and have some level of hardware filtering that further decreases responsiveness, while the HYKU provides 600 Hz of raw sensor output.

Using the HYKU

The HYKU tablet is plug and play and requires no drivers. The screen and tablet area settings are written and saved on the tablet through the HYKU Configurator utility.

The configurator utility allows:

• Setting Screen area and Tablet area
• Setting cursor smoothing

The tablet features a single button:

Download

The latest version of the configurator program can be found in Releases.

What’s in the Box

• 1x HYKU Tablet, fully assembled
• 1x Tablet Pen, Removable

Tablet Specs

• Polling Rate: 600 Hz
• Max Tablet Area: Approx. 100mm x 80mm
• Max Physical Resolution: Approx. 0.091mm
• Connector: USB-C
• Hot Swappable Switch

Tablet Usage Instructions

1. Plug in tablet with a USB-C cable (not included)
2. Press the key for right mouse button
3. Activate/deactivate tablet by holding down the key for 1 second
4. Configure tablet area and other options by using the HYKU Configurator.

Configurator Usage Instructions

1. Configure tablet screen area and tablet area by entering values in the Area Settings tab.
2. Ensure Tablet is plugged in and reconized by the program with the “Connected” indicator at the bottom left.
3. Press the Upload button to apply settings and upload them to the tablet.

Gallery